Comparative study on standardized tests to determine energy efficiency in three-phase induction motors operating at partial load

Alejandro Paz Parra; Manuel Vicente Valencia; Carlos Alberto Lozano Espinoza

doi:10.1007/978-3-030-02683-7_64

Comparative study on standardized tests to determine energy efficiency in three-phase induction motors operating at partial load

Alejandro Paz Parra, Manuel Vicente Valencia, Carlos Alberto Lozano Espinoza

Universidad Javeriana

Producción: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

Resumen

Present paper shows a comparative analysis of the results obtained by the application of three different standard tests procedures to calculate the energy efficiency on induction motors and the separated losses. Test procedures considered are the IEC60034, IEEE112 and CSA390 standards. Each of these procedures define different ways to obtain the separated losses and to estimate the energy efficiency, thus they deliver different results in its calculation; sometimes considerable difference between the efficiency calculations are obtained and reported. The conducted tests were executed in laboratory controlled conditions in an induction motor driven at different percentage of load and following the indications of each standard procedure; results are shown and discussed.

Idioma original	Inglés
Título de la publicación alojada	Proceedings of the Future Technologies Conference (FTC) 2018 - Volume 2
Editores	Supriya Kapoor, Kohei Arai, Rahul Bhatia
Editorial	Springer Verlag
Páginas	896-903
Número de páginas	8
ISBN (versión impresa)	9783030026820
DOI	https://doi.org/10.1007/978-3-030-02683-7_64
Estado	Publicada - 2019
Evento	Future Technologies Conference, FTC 2018 - Vancouver, BC, Canadá Duración: 15 nov. 2018 → 16 nov. 2018

Serie de la publicación

Nombre	Advances in Intelligent Systems and Computing
Volumen	881
ISSN (versión impresa)	2194-5357

Conferencia

Conferencia	Future Technologies Conference, FTC 2018
País/Territorio	Canadá
Ciudad	Vancouver, BC
Período	15/11/18 → 16/11/18

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

Acceder al documento

10.1007/978-3-030-02683-7_64

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Parra, A. P., Valencia, M. V., & Espinoza, C. A. L. (2019). Comparative study on standardized tests to determine energy efficiency in three-phase induction motors operating at partial load. En S. Kapoor, K. Arai, & R. Bhatia (Eds.), Proceedings of the Future Technologies Conference (FTC) 2018 - Volume 2 (pp. 896-903). (Advances in Intelligent Systems and Computing; Vol. 881). Springer Verlag. https://doi.org/10.1007/978-3-030-02683-7_64

Parra, Alejandro Paz ; Valencia, Manuel Vicente ; Espinoza, Carlos Alberto Lozano. / Comparative study on standardized tests to determine energy efficiency in three-phase induction motors operating at partial load. Proceedings of the Future Technologies Conference (FTC) 2018 - Volume 2. editor / Supriya Kapoor ; Kohei Arai ; Rahul Bhatia. Springer Verlag, 2019. pp. 896-903 (Advances in Intelligent Systems and Computing).

@inproceedings{8052406f48b44f879f00beb1fe12a1d0,

title = "Comparative study on standardized tests to determine energy efficiency in three-phase induction motors operating at partial load",

abstract = "Present paper shows a comparative analysis of the results obtained by the application of three different standard tests procedures to calculate the energy efficiency on induction motors and the separated losses. Test procedures considered are the IEC60034, IEEE112 and CSA390 standards. Each of these procedures define different ways to obtain the separated losses and to estimate the energy efficiency, thus they deliver different results in its calculation; sometimes considerable difference between the efficiency calculations are obtained and reported. The conducted tests were executed in laboratory controlled conditions in an induction motor driven at different percentage of load and following the indications of each standard procedure; results are shown and discussed.",

keywords = "Efficiency, Electric machinery, Energy conversion, Energy losses, Induction motor",

author = "Parra, {Alejandro Paz} and Valencia, {Manuel Vicente} and Espinoza, {Carlos Alberto Lozano}",

note = "Publisher Copyright: {\textcopyright} Springer Nature Switzerland AG 2019.; Future Technologies Conference, FTC 2018 ; Conference date: 15-11-2018 Through 16-11-2018",

year = "2019",

doi = "10.1007/978-3-030-02683-7_64",

language = "English",

isbn = "9783030026820",

series = "Advances in Intelligent Systems and Computing",

publisher = "Springer Verlag",

pages = "896--903",

editor = "Supriya Kapoor and Kohei Arai and Rahul Bhatia",

booktitle = "Proceedings of the Future Technologies Conference (FTC) 2018 - Volume 2",

address = "Germany",

}

Parra, AP, Valencia, MV & Espinoza, CAL 2019, Comparative study on standardized tests to determine energy efficiency in three-phase induction motors operating at partial load. En S Kapoor, K Arai & R Bhatia (eds.), Proceedings of the Future Technologies Conference (FTC) 2018 - Volume 2. Advances in Intelligent Systems and Computing, vol. 881, Springer Verlag, pp. 896-903, Future Technologies Conference, FTC 2018, Vancouver, BC, Canadá, 15/11/18. https://doi.org/10.1007/978-3-030-02683-7_64

Comparative study on standardized tests to determine energy efficiency in three-phase induction motors operating at partial load. / Parra, Alejandro Paz; Valencia, Manuel Vicente; Espinoza, Carlos Alberto Lozano.
Proceedings of the Future Technologies Conference (FTC) 2018 - Volume 2. ed. / Supriya Kapoor; Kohei Arai; Rahul Bhatia. Springer Verlag, 2019. p. 896-903 (Advances in Intelligent Systems and Computing; Vol. 881).

Producción: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Comparative study on standardized tests to determine energy efficiency in three-phase induction motors operating at partial load

AU - Parra, Alejandro Paz

AU - Valencia, Manuel Vicente

AU - Espinoza, Carlos Alberto Lozano

N1 - Publisher Copyright: © Springer Nature Switzerland AG 2019.

PY - 2019

Y1 - 2019

N2 - Present paper shows a comparative analysis of the results obtained by the application of three different standard tests procedures to calculate the energy efficiency on induction motors and the separated losses. Test procedures considered are the IEC60034, IEEE112 and CSA390 standards. Each of these procedures define different ways to obtain the separated losses and to estimate the energy efficiency, thus they deliver different results in its calculation; sometimes considerable difference between the efficiency calculations are obtained and reported. The conducted tests were executed in laboratory controlled conditions in an induction motor driven at different percentage of load and following the indications of each standard procedure; results are shown and discussed.

AB - Present paper shows a comparative analysis of the results obtained by the application of three different standard tests procedures to calculate the energy efficiency on induction motors and the separated losses. Test procedures considered are the IEC60034, IEEE112 and CSA390 standards. Each of these procedures define different ways to obtain the separated losses and to estimate the energy efficiency, thus they deliver different results in its calculation; sometimes considerable difference between the efficiency calculations are obtained and reported. The conducted tests were executed in laboratory controlled conditions in an induction motor driven at different percentage of load and following the indications of each standard procedure; results are shown and discussed.

KW - Efficiency

KW - Electric machinery

KW - Energy conversion

KW - Energy losses

KW - Induction motor

UR - http://www.scopus.com/inward/record.url?scp=85055903650&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-02683-7_64

DO - 10.1007/978-3-030-02683-7_64

M3 - Conference contribution

AN - SCOPUS:85055903650

SN - 9783030026820

T3 - Advances in Intelligent Systems and Computing

SP - 896

EP - 903

BT - Proceedings of the Future Technologies Conference (FTC) 2018 - Volume 2

A2 - Kapoor, Supriya

A2 - Arai, Kohei

A2 - Bhatia, Rahul

PB - Springer Verlag

T2 - Future Technologies Conference, FTC 2018

Y2 - 15 November 2018 through 16 November 2018

ER -

Parra AP, Valencia MV, Espinoza CAL. Comparative study on standardized tests to determine energy efficiency in three-phase induction motors operating at partial load. En Kapoor S, Arai K, Bhatia R, editores, Proceedings of the Future Technologies Conference (FTC) 2018 - Volume 2. Springer Verlag. 2019. p. 896-903. (Advances in Intelligent Systems and Computing). doi: 10.1007/978-3-030-02683-7_64

Comparative study on standardized tests to determine energy efficiency in three-phase induction motors operating at partial load

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto