Selective hopping maximum power point tracking method for PV systems

Carlos Andrés Giraldo-Castañeda, Lionel R. Orama-Exclusa

Producción: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

2 Citas (Scopus)

Resumen

A variety of methods have been developed to enhance maximum power output of photovoltaic (PV) modules. Such methods are known as Maximum Power Point Tracking (MPPT). This paper presents a newly proposed method identified as the Selective Hopping method (SH). The SH is based on a tracking algorithm of the PV power curve. The proposed SH modifies the Perturbation and Observation method (P&O) allowing improvement such as convergence time, available power, computational cost and decrease power deflections. The SH and IP&O methods were fully characterized on an embedded DSP systems. The SH shows a convergence time improvement at least 10 times higher than that for IP&O and delivers between 2% and 5% more available power to the system.

Idioma originalInglés
Título de la publicación alojada2008 IEEE International Conference on Sustainable Energy Technologies, ICSET 2008
Páginas459-463
Número de páginas5
DOI
EstadoPublicada - 2008
Publicado de forma externa
Evento2008 IEEE International Conference on Sustainable Energy Technologies, ICSET 2008 - Singapore, Singapur
Duración: 24 nov. 200827 nov. 2008

Serie de la publicación

Nombre2008 IEEE International Conference on Sustainable Energy Technologies, ICSET 2008

Conferencia

Conferencia2008 IEEE International Conference on Sustainable Energy Technologies, ICSET 2008
País/TerritorioSingapur
CiudadSingapore
Período24/11/0827/11/08

Huella

Profundice en los temas de investigación de 'Selective hopping maximum power point tracking method for PV systems'. En conjunto forman una huella única.

Citar esto